How to Clean Up the Stains on the Surface of the Punching Mesh Better?

As an Expanded Metal Mesh Supplier, share with you.

How to clean up the stains on the surface of the punching mesh better?

The raw materials used for punching mesh are mostly stainless steel plates, low carbon steel plates, galvanized plates, PVC plates, cold rolled coils, hot rolled plates, aluminum plates, copper plates, and so on.

Introduce how to clean up the stains on the surface of the punching net:

Decorative Perforated Metal Mesh

1. There are bleaching agents and various acids attached to the surface of the punching net. Immediately rinse with water, then soak with ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water.

2. If there is dust on the surface of the punching net and the dirt is easy to remove, it can be washed with a fan, a weak scrubbing agent or warm water. The trademark and film on the stainless steel surface should be cleaned with warm water and weak detergent, and the binder component should be scrubbed with alcohol or organic solvent. Wipe clean with a soft cloth, and then use a neutral detergent or ammonia solution or a special detergent to clean it.

3. It can be washed away with warm water detergent when washing. Rust caused by dirt on the surface of stainless steel can be scrubbed with 10% nitric acid or abrasive scrubbing agent, or with special scrubbing chemicals. As long as we use the correct maintenance methods, we can extend the service life of stainless steel and keep it clean.

4. The intergranular corrosion cracking inside the punching net, all of which will damage the passive film on the surface of the stainless steel punching net. Therefore, regular cleaning and maintenance of the stainless steel surface are carried out to maintain a clean appearance and extend the service life. When cleaning the stainless steel surface, be careful not to scratch the surface.

Our company also has Decorative Perforated Metal Mesh on sale, welcome to contact us.