What is the Treatment Method for Stainless Steel Filter Mesh?

As a Stainless Steel Coffee Filter Mesh Supplier, share with you.

Stainless steel products are everywhere in our lives and bring a lot of convenience to our lives, but stainless steel will also rust to a certain extent, so what if the stainless steel is rusted? The stainless steel filter has a passivation film on the outside. Some parts with weaker corrosion resistance will affect the reaction, which will form a pitting reaction and form small pores. The approach of chloride ions will form a large strong corrosion solution. Accelerated corrosion.

Corrosion cracks can also occur inside stainless steel. All of the above factors can damage the passivation film on the stainless steel surface. Therefore, stainless steel surfaces must be regularly cleaned and maintained to maintain their appearance and extend their useful life. However, when cleaning the appearance of stainless steel, care must be taken with the appearance of scratching.

SS 304 Perforated Filter Mesh

Another point is that workers in many places do not pay attention to wearing gloves when using stainless steel mesh. Sweat on the palm contacts the surface of the mesh and oxidizes the surface of the mesh. This is very cumbersome and most manufacturers will come up with it. There is a phenomenon, because cleaning costs are generally borne, so you must pay attention to these when selling stainless steel mesh.

With the prosperity of the economy, SS 304 Perforated Filter Mesh has been widely used. People cannot do without stainless steel in their daily life. However, many people don't know much about the characteristics of stainless steel and little about the protection of stainless steel. If you think stainless steel will never rust, that's a big mistake. The corrosion resistance of stainless steel is excellent because its appearance will form a passivation film, such as a protective layer on the surface of the mesh to prevent rust. That is, although the degree of oxidation of stainless steel depends on the use conditions, it will eventually be oxidized. This phenomenon is often called corrosion.

The stainless steel filter element can clean the stainless steel filter element to remove dust by blowing air into the stainless steel filter element. This method saves time and effort, so you can easily finish cleaning. Second, you can choose to hit the stainless steel filter element manually to remove the dust in the stainless steel filter element, but this method is more time-saving and labor-saving. This method usually contains stubborn dust left inside. When the stainless steel filter is disassembled, it is necessary to have more professional people to remove the dust, so as to ensure that the reasons for cleaning the stainless steel filter will not cause stainless steel problems, and the method of cleaning the stainless steel filter.

Our company also has Decorative Perforated Metal Mesh for sale, welcome to consult.